The hot packing machine specific for packaging wood and metal products


The hot packaging and cold packaging is different technique which used for the packing process and the treatment to the packaging material. Although the packaging material of the both packaging methods are having some similarities, they are both plastic film and the basic raw material is PE. But the hot packing method adopts heat sealing blade and heat shrink tunnel to seal the package and shrink it to tight condition while the cold packing method is using the film mechanically stretched and wrapped to the products to give it the protection. Compare to the cold packaging, the hot packaging can hold the product better and keep it airtight and have more protection. Further more, the package is more transparent and allows you to see the inside condition.

Which industries require hot packs? 

There are many industry require the hot packaging, mainly has the same reason- they need to keep their product in good condition while having the nice exterior and more transparent. To be specific, like the door manufacturing industry, timber and lumber, building material, aluminum profiles, kitchen cabinet………They all require fully sealed package and beautiful exterior.

Some of the models of the hot packaging machines we use commonly:

1.  The side sealing shrink wrapping machine. The machine has thermal sealing blade to do the weld in transverse direction and side sealer to make the side sealing continuously. This model has less limitation for the product size, both long and short bundles are available on this machine.

2. Door panel shrink wrapping machine. This industrial shrink wrapping machine uses a state-of-the-art process that will provide you with a long list of advantages. It is ideal for flat parts with the same or very similar regular shapes and long lengths. With the overlap shrink packer, we present an automatic packaging system designed to work with shrink film and overlap bottom sealing for high-quality finishes. The installation of this hot packaging machine consists of an in-feed table, a sealing head and a set of metal blades with film, an intermediate table and a shrink tunnel.

It is an ideal system for all those companies or packaging plants that need to obtain a total visualization of the product, optimizing production times, adjusting costs to the maximum and increasing their added value.


2 Replies to “The hot packing machine specific for packaging wood and metal products”

  1. Twicsy says:

    Excellent website you have here but I was curious
    if you knew of any message boards that cover the same topics discussed here?
    I’d really like to be a part of community where I can get advice from other knowledgeable people that share the same interest.
    If you have any suggestions, please let me know. Thank you!

  2. vnOKybjlUctRWA says:


Comments are closed.


Recent Posts

Recent Comments